SET NODE BOOT

Enter this command to set the boot operation for a specific node or all nodes:

PXE—Attempts to boot an image hosted by a PXE server on the network.
HDD—Boots from locally attached disk drive .
ISCSI—If applicable, this boots the cartridge through iSCSI from the NIC.
M.2—If applicable, this boots from a locally installed solid state M.2 device.
CLEAR—This clears the node boot setting. This is useful to force the ROM to follow UEFI boot options when using UEFI-enabled cartridges.

The command accepts an optional second boot source. The second boot source is used if the primary boot source is unavailable at boot.


	NOTE: The default boot value for each node is PXE.

Command syntax

set node boot { hdd | pxe|m.2|iscsi | clear } [ hdd | pxe | M.2 | iSCSI ] { <CxNy> | all }

Operator

None

Command output example

hpiLO-> set node boot hdd c1n1

Boot Configuration Information:
#------------------------------
  c1: #Cartridge 1
    c1n1: #Node 1
      boot: HDD