SHOW LOG IML

Enter this command to display the Moonshot iLO CM IML. Specify a cartridges, nodes, chassis, switch, and date range to filter the displayed events. If All is specified, or if no arguments are provided, the entire log is shown.

Command syntax

show log iml {[All] | [<Cx>] | [<CxNy>] | chassis | sA | sB | <start-date> <end-date> }


	NOTE: The values for *`<start_date>`* and *`<end_date>`* must be in MM/DD/YYYY format.

Access privilege

All

Restrictions

None

Output

The Moonshot iLO CM IML increments the Count for each similar event that occurs, and records when the similar event happened in the Update Date and Update Time fields. The rules that control the grouping of events vary between event types.

Command output example

hpiLO-> show log iml all
Event 1581:
  Count        : 1
  Severity     : Informational
  Class        : Maintenance
  Description  : "IML Cleared (iLO user: a)"
  Initial Date : 05/21/2014
  Initial Time : 02:12
  Update Date  : 05/21/2014
  Update Time  : 02:12
  Location     : iLO CM
.
.
.
Event 1586:
  Count        : 1
  Severity     : Informational
  Class        : System Revision
  Description  : "Firmware flashed (iLO Chassis Manager 1.20)"
  Initial Date : 05/21/2014
  Initial Time : 21:35
  Update Date  : 05/21/2014
  Update Time  : 21:35
  Location     : iLO CM

Displayed events: 6