SHOW NODE MACADDR

Enter this command to display the MAC addresses for the specified nodes.


	NOTE: Only MAC addresses that are programmed into each FRU display.

Command syntax

show node macaddr { <CxNy> | all }

Access privilege

All

Restrictions

None

Output

Command output example

hpiLO-> show node macaddr all

Slot ID    NIC 1 (Switch A)  NIC 2 (Switch B)  NIC 3 (Switch A)  NIC 4 (Switch B)
---- ----- ----------------- ----------------- ----------------- -----------------
  1  c1n1  2c:59:e5:48:00:6e 2c:59:e5:48:00:6f N/A               N/A
  2  c2n1  f0:92:1c:b4:42:48 f0:92:1c:b4:42:49 f0:92:1c:b4:42:4a f0:92:1c:b4:42:4b
  6  c6n1  44:1e:a1:d3:ab:3c 44:1e:a1:d3:ab:3d N/A               N/A
  7  c7n1  44:1e:a1:d3:ab:3c 44:1e:a1:d3:ab:3d N/A               N/A
 24  c24n1 f0:92:1c:b4:40:9c f0:92:1c:b4:40:9d f0:92:1c:b4:40:9e f0:92:1c:b4:40:9f
 36  c36n1 00:0a:e4:19:54:e0 00:0a:e4:19:54:e1 N/A               N/A
 36  c36n2 00:0a:e4:19:54:e2 00:0a:e4:19:54:e3 N/A               N/A
 36  c36n3 00:0a:e4:19:54:e4 00:0a:e4:19:54:e5 N/A               N/A
 36  c36n4 00:0a:e4:19:54:e6 00:0a:e4:19:54:e7 N/A               N/A
 42  c42n1 44:1e:a1:d3:b2:da 44:1e:a1:d3:b2:db N/A               N/A