IPv4 Subnets and Address Ranges
These fields apply to Add and Edit operations.
Screen component |
Description |
---|---|
Subnet ID | IP address representing the network ID of the subnet. |
Subnet Mask | Bitmask that characterizes the subnet in which the range belongs. It is used in conjunction with the subnet ID to determine the network routing prefix. |
Gateway | IP address of the gateway. |
Domain | Domain name. |
DNS | IP addresses of the DNS servers. Up to 3 DNS servers are supported. |
Associated Networks | Link to the associated networks. The association is between the subnet and the VLAN ID. |
Address Ranges | List of address ranges. |
Available addresses | Number of available addresses for the subnet. |
Name | Unique name for the address range. |
First IP address | Starting address in the range. |
Last IP address | Ending address in the range. |
Enabled | Enable or disable the address range. By default, IPv4 address ranges are enabled. |
Start | A valid IPv4 address for the start of the range. |
End | A valid IPv4 address for the ending of the range. |
Count | Total number of addresses in the range. |
Allocated | Number of addresses in use. |
Available | Number of available addresses remaining. |
Edit the subnet and address range. |
|
Remove the range of addresses and make them unavailable. You cannot remove a range or subnet that is associated with other resources or has addresses in use. |