Refresh the enclosure to re-synchronize it with HPE OneView

The Refresh action queries the hardware to obtain the latest information and re-discovers all of the devices (servers, interconnects, fans, and power supplies) in the enclosure. Refresh is typically performed automatically when required. 

Perform a manual refresh when instructed to do so by the resolution of an alert on the enclosure.

NOTE:

You cannot refresh an enclosure if another operation is being performed on the enclosure. Wait until the operation is complete and then refresh.

Prerequisites

Minimum required privileges: Infrastructure administrator or Server administrator

Procedure
  1. From the main menu, select Enclosures.
  2. In the master pane, select the enclosure that you want to refresh.
  3. Select Actions > Refresh.
  4. Click OK.
  5. To verify that the activity is successful, check the activity for a green status in the Notifications area.

    If the activity is not successful, follow the instructions in the proposed resolution.