Add or remove networks

Screen component

Description

Networks
Select the network(s) to add to this uplink set.
  • For internal networks, select the network(s) to use for server-to-server communication.

  • You must assign at least one network to an uplink set, except for internal networks which can remain empty (with no networks assigned).

  • For Fibre Channel, you can add one network.

  • For FCoE, see the HPE OneView Support Matrix for HPE Synergy for the number of networks you can add.

  • For Image Streamer, see About defining Image Streamer uplink sets in logical interconnects.

  • A network can be a member of only one uplink set per logical interconnect or logical interconnect group. The menu lists the networks that are not currently assigned to an uplink.

  • You can designate one Ethernet network as native for each tagged Ethernet uplink set.

  • There can only be one untagged network defined for the entire logical interconnect, including internal networks.

You can designate a VLAN as Native to accept untagged packets from an upstream data center switch; otherwise, all untagged packets arriving at the uplink port are dropped. When a network is configured as Native, the network accepts tagged or untagged packets.

Add networks

Assign one or more networks to the uplink set you are creating. To select multiple networks, use the Ctrl or Shift key while clicking.

Remove networks

Remove one or more networks from the uplink set. To select multiple networks, use the Ctrl or Shift key while clicking.

Remove all

Remove all networks assigned to the uplink set.