Uplink Sets

Screen component

Description

Uplink set name

Name

Description

Connection mode

(Ethernet only)

Connection mode for the uplink set.

Automatic

The uplinks determine the active path.

LACP timer

The frequency of exchange of Link Aggregation Control Protocol (LACP) control messages between devices in a Link Aggregation Group (LAG).

Short (1s)

Every 1 second with a 3 second timeout

Long (30s)

Every 30 seconds with a 90 second timeout

See Manage the frequency of control messages through the LACP timer for more information.

Trunking

Displays the mode for the uplink set (Enabled/Disabled).

Networks

(Ethernet or FCoE networks only)

The number of Ethernet or FCoE networks assigned to this uplink set, followed by the network names and VLAN IDs. Add FCoE networks to uplink sets with FCoE capable ports that are all on the same interconnect.

Each network name is a hyperlink to an overview of the networks on the Networks screen.

Uplinks

The bay, port numbers, speed, and auto-negotiation status associated with the network.

HPE Oneview provides an option to configure the QSFP uplink port of an uplink set in Auto speed mode or Fixed speed mode. In Auto speed mode, speed and auto-negotiation are set by the interconnect module, based on the inserted transceiver. Whereas, in case of fixed speed, auto-negotiation is disabled and fixed speed is set by HPE OneView.

More information