Edit SNMP Settings

SNMPv1 read community string

Credential applied to access data on managed and monitored devices that support SNMPv1 only.

Add SNMPv3 User
User name

Unique SNMPv3 user name. Each SNMPv3 user name is associated with a security level.

Security Level
None
No security level set.
Authentication

Requires an authentication protocol and passphrase.

Authentication and privacy

Requires an authentication protocol and passphrase, and a privacy protocol and passphrase.

Authentication Protocol
MD5

Message Digest 5 (MD5) authentication protocol

SHA1

Secure Hash Algorithm 1 (SHA1) authentication protocol

SHA-256

Cryptographic hash function uses 256 bits.

SHA-384

Cryptographic hash function uses 384 bits.

SHA-512

Cryptographic hash function uses 512 bits.

Authentication Passphrase

Authentication passphrase (minimum of 8 characters) associated with the SNMPv3 user.

Privacy Protocol
DES

Data Encryption Standard (DES) method of data encryption.

3DES

Triple Data Encryption Standard (3DES) method of data encryption applies the DES cipher algorithm three times to each data block.

AES-128

Advanced Encryption Standard (AES) method of data encryption with a key size of 128 bits.

AES-192

AES data encryption with a key size of 192 bits.

AES-256

AES data encryption with a key size of 256 bits.

Privacy Passphrase

Privacy passphrase (minimum of 8 characters) associated with the SNMPv3 user.

Add Trap Destination
Trap Destination

The IP address or host name of the SNMP manager to which traps are forwarded. Both IPv4 and IPv6 addresses are supported.

Port

The port number, from 1 to 65535, configured at the destination receiving SNMP traps.

Default: 162

Trap format

Format of traps: SNMPv1 or SNMPv3

Setting the destination as an SNMPv1 trap, requires you also set the Community String.

Setting the destination as an SNMPv3 trap, requires you also set the SNMPv3 User name.

Community String (SNMPv1)

The shared community name for authentication that serves as a password for a trap forwarding destination. This should match the community string of the destination.

User name (SNMPv3)

SNMPv3 user name.