Active and standby HPE Synergy Composer appliances are not connected
The Appliance panel of the Settings page shows that the active appliance and the standby appliance are not connected.
Solution 1Cause
Action
The standby appliance is not powered on.
- Log in as the Infrastructure administrator.
- Open the Enclosures page.
- Ensure that the standby appliance is powered on.
- Log into the Maintenance console to verify the health status of the appliance.
Solution 2Cause
Action
The enclosure is not powered on.
- Log in as the Infrastructure administrator.
- Open the Enclosures page.
- Ensure that the enclosure is powered on.