Import hypervisor cluster profile

You can import existing hypervisor clusters that were created outside of HPE OneView and manage them through HPE OneView.

  • Privileges: Infrastructure administrator, Server administrator, Server profile architect, or Server profile administrator.

  • A hypervisor manager is registered in HPE OneView.

  • A hypervisor cluster is created outside of HPE OneView.

  • Server profile template is created with the server hardware type set based on the servers nodes present in the cluster and has the required configurations.

  • The hypervisor management network has the purpose set as Management and in the server profile template a connection exists to this network or to a network set having this network.

  • For a hypervisor cluster that is imported into HPE OneView, all the hypervisor hosts in a cluster have the same management vSwitch name.

  • Parameters are set in vCenter to the following values:
    • config.vpxd.heartbeat.notRespondingTimeout = 350

    • = 90

    For detailed instructions on how to modify these parameters in vCenter, see VMware vSphere troubleshooting documentation.
  1. From the main menu, select HYPERVISORS > Hypervisor Cluster Profiles.
  2. In the master pane, select + Import hypervisor cluster profile.
  3. Enter the data requested on the screen.
  4. Click Import to complete the action or click Import + to import another cluster profile.

    At this point, you might observe reported inconsistencies. You will need to resolve them.

  5. Verify that the imported hypervisor cluster profiles appear in the master pane.