Enabling or disabling LLDP tagging on an existing logical interconnect group or logical interconnect

Prerequisites
  • Minimum required privileges: Infrastructure administrator or Network administrator

  • Minimum required Virtual Connect firmware version: 4.45

Procedure
  1. Edit the logical interconnect group or the logical interconnect.
  2. Locate Interconnect Settings, and then change the LLDP tagging setting.
    1. Select LLDP tagging to enable.
    2. Deselect LLDP tagging to disable.
  3. To verify that the LLDP tagging was changed, view the setting in the Interconnect Settings view.