Add an SNMP trap destination

Prerequisites

Privileges: Infrastructure administrator or Network administrator

Procedure
  1. From the main menu, select NETWORKING > Logical Interconnects or Logical Interconnect Groups, select the logical interconnect, and then do one of the following:
    • Select Actions > Edit.

    • Click the Edit icon.

  2. In the SNMP view, click Add trap destination.
  3. Enter the requested trap destination data.
  4. Click Add, or click Add + to add another trap destination.
  5. Click OK to update the logical interconnect or logical interconnect group.
  6. To verify that the specified SNMP trap destination was added, locate the SNMP trap destination information in the SNMP view.