Add or edit a power delivery device

Add or edit an iPDU power delivery device

The following table describes power delivery device configuration characteristics. To add or edit the properties of a non-iPDU device, see Add or edit a non-iPDU power delivery device.

Screen Component

Description

Type

The type of power device, do not change from the default value to add an iPDU.

Default value:

HPE Intelligent Power Distribution Unit

IP address or hostname

The fully qualified name, IPv4 address, or IPv6 address of the power delivery device

Data type:

Any alphanumeric characters, including the special characters hyphen (-), and underscore (_)

User name

Name of a user with the appropriate authorization settings to access the iPDU

Password

Password for the user with access to the iPDU

Name

The user-defined name assigned to the power delivery device.

Data type:

Any alphanumeric characters, special characters, and spaces

Power Connections

This section displays the details of the power connections to the power delivery device.

Use this section to add and remove power connections.

Name

The name of the device that is connected to the power delivery device

The device name is a hyperlink to an overview of the device on the corresponding screen for the device type.

Model

The model name of the device connected to the power delivery device

Connection

The name of the device that provides the connection to the power delivery device

Connection is blank if no connection is specified or if the device is a power delivery device

If the connection is to an HPE AC Module, the connection is the name its enclosure, which is a hyperlink to the overview of the enclosure on the Enclosures screen.

Remove

Click the X to remove the device in that row from the power connections to the power delivery device

Add connections button

Opens the Add connections dialog box

Buttons

See Button functions for information about how buttons operate.

Add or edit a non-iPDU power delivery device

The following table describes power delivery device configuration characteristics. To add or edit the properties of an iPDU device, see Add or edit an iPDU power delivery device.

See Power delivery device types for a list of device types.

Screen Component

Description

Type

Select the type of power delivery device.

Name

Enter the name of the power delivery device.

Data type:

A maximum of 100 alphanumeric characters, including the following special characters: hyphen (-) and underscore (_)

Model

The model name of the power delivery device

Rated capacity

The rated capacity for the power delivery device, in amperes (A)

Line voltage

The input line voltage for the power delivery device, in volts (V)

Select the phase of the line voltage. Choose from Single Phase, Single Phase Intl, Three Phase Delta, Three Phase Unknown, and Three Phase Wye.

Power feed

The device power feed side setting: A or B

Part number

The part number of the power delivery device (optional)

Data type:

A maximum of 20 alphanumeric characters, spaces, and symbols. Leading and trailing spaces are removed.

Serial number

The serial number of the power delivery device (optional)

Data type:

A maximum of 20 alphanumeric characters, spaces, and symbols. Leading and trailing spaces are removed.

Power Connections

This section displays the details of the power connections to the power delivery device.

Use this section to add and remove power connections.

Remove

Click the X to remove the device in that row from the power connections to the power delivery device

Add connections button

Click the Add connections button to open the Add connections dialog box.

Remove all button

Click the Remove all button to remove all power connections from the power delivery device

Buttons

See Button functions for information about how buttons operate.