Modify the enclosure group when all enclosures will include Image Streamer

NOTE:

If some, but not all the logical enclosures will include Image Streamer, Modify the enclosure group when some enclosures will include Image Streamer.

If all of the logical enclosures in an enclosure group will include Image Streamer, use the following steps to modify the enclosure group.

Prerequisites
  • Privileges: Infrastructure Administrator

  • Uplinks have been added for Image Streamer.

Procedure
  1. From the main menu, select SERVERS > Enclosure Groups, then do one of the following:
    • In the master pane, select the enclosure group that you want to edit and select Actions > Edit.
    • Hover your pointer in the details pane and click the Edit icon.

  2. Edit the enclosure group to remove the existing logical interconnect group from each HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy, where the Image Streamer devices are connected.
  3. Set the Logical Interconnect Group to None, and save your changes.
  4. From the main menu, navigate to the Logical Interconnect Group screen, and Edit a Logical Interconnect group to add a new Image Streamer uplink set.
  5. Edit the enclosure group to add the modified logical interconnect group, and set the deployment network type to internal.
  6. Select Update from group from the Logical Enclosure screen to configure the deployment cluster for OS deployments.
  7. Depending on whether the Image Streamer configuration is multiframe or singleframe, add uplink sets specific to the Image Streamer configuration.
    1. Specify a Name.
    2. Set Type.
    3. Set the Network to the deployment network previously created.
    4. Add uplink ports for the installed HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy or the installed HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy connections.

      For HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy and HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy, do the following:

      • For a multiframe HA configuration, add the uplink ports to both the A and B side of the module.

        For example: Q{x}.1 and Q{x}.2 for HPE Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver.

      • For a singleframe non-HA configuration, add the uplink port to the A side of the HPE Synergy Virtual Connect Ethernet Module.

        For example: Q{x}.1 for HPE QSFP+ to SFP+ adapter and HPE 10G base T SFP+ transceiver

    5. Add uplink ports for the installed.
  8. Save your changes.
  9. From the main menu, select SERVERS > Enclosure Groups to select and edit the enclosure group, performing the following three changes together:
    1. Set the Deployment network type.
      • External for singleframe non-HA configuration.
        NOTE:

        If HPE Virtual Connect SE 100Gb F32 Module for Synergy interconnect is used in single-frame, the deployment network mode can be set to Internal.

      • Internal for multiframe HA configuration.

    2. Set the Network to the deployment network previously created.
    3. Add the edited Logical Interconnect Group to the Enclosure Group.
  10. Add an Image Streamer OS deployment server.