HPE or Cisco SAN manager

NOTE:

A SAN manager must be properly configured before you can add it to HPE OneView for management. See Configuring SAN managers to be managed by HPE OneView for more information.

Screen component

Description

SAN manager type

HPE or Cisco

General
IP address or host name

Host name or IP address of the SAN manager.

SNMP
Port

Port on which the SAN manager listens for SNMP requests. The default port is 161.

User name

User name set on the SAN manager for managing SNMP.

Security level
The SNMP security level set on the SAN manager:
Authentication

Encryption type set on the SAN manager, can be SHA or MD5.

Authentication and privacy

Authentication encryption type and privacy password set on the SAN manager.

None (HPE SAN managers only)

No SNMP security is set on the SAN manager.

Authentication protocol

The authentication protocol set on the SAN manager; can be SHA or MD5.

Authentication password

The authentication password set on the SAN manager.

Privacy protocol

(Authentication and privacy security level only)

The privacy protocol set on the SAN manager (For Authentication and privacy security levels); can be DES-56, AES-128, or 3DES (HPE SAN managers only).

Privacy password

(Authentication and privacy security level only)

The privacy password set on the SAN manager (For Authentication and privacy security levels).