SNMP
- SNMPv1 read community string
Credential applied to access data on managed and monitored devices that support SNMPv1 only.
- SNMPv3 Engine ID
HPE OneView SNMP agent engine ID.
- SNMPv3 Users
- User Name
Unique SNMPv3 user name. Each SNMPv3 user name is associated with a security level.
- Security Level:
- None
No security level is set.
- Authentication
Requires an authentication protocol and passphrase.
- Authentication and privacy
Requires an authentication protocol and passphrase, and a privacy protocol and passphrase.
- Authentication Protocol
- MD5
Message Digest 5 (MD5) authentication protocol
- SHA1
Secure Hash Algorithm 1 (SHA1) authentication protocol
- SHA-256
Cryptographic hash function uses 256 bits.
- SHA-384
Cryptographic hash function uses 384 bits.
- SHA-512
Cryptographic hash function uses 512 bits.
- Privacy Protocol
- DES
Data Encryption Standard (DES) method of data encryption.
- 3DES
Triple Data Encryption Standard (3DES) method of data encryption applies the DES cipher algorithm three times to each data block.
- AES-128
Advanced Encryption Standard (AES) method of data encryption with a key size of 128 bits.
- AES-192
AES data encryption with a key size of 192 bits.
- AES-256
AES data encryption with a key size of 256 bits.
- Trap Destination:
- Trap Destination
The IP address or host name of the SNMP manager to where traps are forwarded. Both IPv4 and IPv6 addresses are supported.
- Port
The port number, from 1 to 65535, configured at the destination receiving SNMP traps.
Default:
162
- Format
Format of traps:
SNMPv1
orSNMPv3
- Community String (SNMPv1)
The shared community name for authentication that serves as a password for a trap forwarding destination. This should match the community string of the destination.
- User name (SNMPv3)
SNMPv3 user name.