Frame Link Module LINK port is connected to an unknown device

Symptom

An alert or error indicates that enclosure management settings are not fully applied. An alert or error indicates that the LINK port is connected to an unknown device.

Cause

Cable connecting the frame link modules are not cabled correctly or the LINK port is connected to an unknown device.

Action
  1. Check the cabling.
    • For multiple HPE Synergy frames, check that each frame link module in a group of frames is cabled to another frame link module in the group through the LINK port. The last frame in the group must have its link module cabled to the link module of the first frame.

    • For a single HPE Synergy frame, check that the two frame link modules are cabled together.

  2. If the cabling is correct, then try re-seating the frame link module.

    For more information on cabling, see the HPE Synergy Cabling Guide at http://www.hpe.com/info/synergy-docs.