Modify the enclosure group when some enclosures will include Image Streamer

NOTE:

If all the logical enclosures in an enclosure group will be using Image Streamer, modify the enclosure group as described in Modify the enclosure group when all enclosures will include Image Streamer.

If some, but not all, of the logical enclosures in an enclosure group will be using Image Streamer, use the following steps to modify the enclosure group.

Prerequisites
  • Privileges: Infrastructure administrator.

  • Image Streamer OS deployment server is added.

  • Uplinks are added for Image Streamer.

Procedure
  1. From the main menu, navigate to the Logical Interconnect Group screen, and copy one or more logical interconnect groups for VC SE 40Gb F8 Modules for HPE Synergy where the Image Streamer devices are connected.
  2. Depending on whether the Image Streamer configuration is multiframe or single frame, add uplink sets specific to the Image Streamer configuration where the Image Streamer devices are connected in the logical interconnect groups copied in the previous step.
    1. Specify a Name.
    2. Set Type.
    3. Set the Network to the deployment network previously created.
    4. Add uplink ports for the installed HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy or the installed HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy connections.
  3. Create a new enclosure group.
    1. Set Deployment network type.
      • External for single frame non-HA configuration.
        NOTE:

        If an HPE Virtual Connect SE 100Gb F32 Module for Synergy interconnect is used in a single frame, the deployment network mode can be set to Internal.

      • Internal for a multiframe HA configuration.

    2. If the Deployment network type is External, set the Network to the deployment network previously created.

      If the Deployment network type is Internal, the Network is automatically selected.

    3. Add the copied and edited Logical Interconnect Groups to this Enclosure Group.
    4. Add all other Logical Interconnect Groups from the original Enclosure Group.
  4. On the Logical Enclosure screen, choose the logical enclosures that must be moved to the new enclosure group and for each:

    Edit and change the enclosure group to the newly created enclosure group.

    NOTE:

    The Enclosures link on a Logical Enclosure screen can be used to view the enclosures and verify that HPE Image Streamer devices are installed in the logical enclosure.