Ports required for HPE OneView
HPE OneView requires specific ports to be available to the appliance to manage servers, enclosures, and interconnects.
Port number |
Protocol |
Use |
Description |
---|---|---|---|
22 |
TCP |
Inbound and Outbound |
Used for SSH and SFTP. SSH is required to communicate with HPE Virtual Connect interconnect modules. SFTP is required for actions such as firmware upgrades and support dumps. |
53 |
UDP and TCP |
Outbound |
Used for DNS client queries. |
80 |
TCP |
Inbound |
Used for the HTTP interface. Typically, this port redirects to port 443; this port provides the access required by the iLO. This port is used by SUT and iSUT for VMware ESXi to connect to the HPE OneView web server. |
123 |
UDP |
Inbound |
HPE OneView acts as an NTP server, iLO requires access. |
123 |
UDP |
Outbound |
Used as an NTP client to synchronize the appliance time. |
161 |
UDP |
Outbound |
Supports SNMP GET calls to monitored and managed devices, such as, server iLOs, iPDU, and SAN Managers. |
162 |
UDP |
Inbound and Outbound for trap forwarding from HPE OneView |
Used for SNMP trap support from the iLO, and iPDU devices. This port is also used to monitor the VC interconnects and trap forwarding. |
443 |
TCP |
Inbound |
Used for the HTTPS interface to user interface and APIs. This port is used by SUT for VMware ESXi to connect to the HPE OneView web server. |
443 |
TCP |
Outbound |
Used for secure SSL access to the iLO, Frame link module, remote support access to Hewlett Packard Enterprise, and other devices. Used for Redfish, RIBCL, SOAP, and iPDU communication. |
636 |
TCP |
Outbound |
Secure LDAP. Used for enterprise directory integration (Microsoft Active Directory, OpenLDAP) |
2162 |
UDP |
Inbound |
Used as an alternative SNMP trap port. |
3269 |
TCP |
Outbound |
Used for Microsoft Active directory LDAP global catalog port. |
5671 |
TCP |
Inbound |
Allows external scripts or applications to connect to and monitor messages from the SCMB (State-Change Message Bus). |
17988 |
TCP |
iLO Integrated Remote Console to iLO | Integrated Remote Console initiating a connection to the iLO. |
17990 |
TCP |
Browser to iLO |
Provides browser access to the integrated remote console. |
63001 and 63002 |
TCP |
Local, on host OS |
Used on the host OS where
SUT (Smart Update Tools) is installed. The communication is on the
|
80 |
TCP |
Outbound |
Used for HTTP communication to Brocade FOS for SAN management. |
443 |
TCP |
Outbound |
Used for HTTPS communication to Brocade FOS for SAN management. Used for HTTPS communication to Primera storage systems. |
5392 |
TCP |
Outbound |
Used for HTTPS communication to Nimble storage systems. |
5989 |
TCP |
Outbound |
Used for CIM/SMI communication to Brocade BNA for SAN management. |
8080 |
TCP |
Outbound |
Used for HTTP/HTTPS communication to 3PAR WSAPI storage systems. |