Scenario 1: Adding HPE BladeSystem c7000 Enclosure to manage to an existing enclosure group
The quickest way to add an enclosure for management by HPE OneView is to specify an existing enclosure group. When you add an enclosure to an existing enclosure group, the enclosure is configured like the other enclosures in the group, including the network connections. This scenario creates a single logical interconnect group for the enclosure.
Resource |
Task |
Description |
---|---|---|
Enclosures |
|
|
Server Profiles |
|
For a server blade to connect to a data center network, it must have a server profile assigned to it, and that server profile must include a connection to either the network or a network set that includes the network:
|
Privileges: Infrastructure administrator or Server administrator.
The hardware configuration of the enclosure interconnects must match the configuration expected by the logical interconnect group that is associated with the enclosure group.
The uplink sets for the logical interconnect group or groups include connections to the networks you want to access.
All data center switch ports that connect to the Virtual Connect (VC) interconnect modules are configured.
The networks and network sets, if any, have been added to HPE OneView.
See Prerequisites for bringing HPE BladeSystem c7000 Enclosure into HPE OneView that you must complete before you add an enclosure.
See Prerequisites for bringing server hardware into an appliance that you must complete before you add a server.