Adding networks to an uplink set

Select networks to add to this uplink set.

  • For internal networks, select the network(s) to use for server-to-server communication.

  • You must assign at least one network to an uplink set, except for internal networks which can remain empty (with no networks assigned).

  • For Fibre Channel, you can add one network.

  • For FCoE, see the HPE OneView Support Matrix for the number of networks you can add.

  • A network can be a member of only one uplink set per logical interconnect or logical interconnect group. The menu lists the networks that are not currently assigned to an uplink.

  • You can designate one Ethernet network as native for each tagged Ethernet uplink set.

  • You can add one Untagged network for each untagged uplink set.

  • You can add one Tunnel network for each tunnel uplink set.

You can designate a VLAN as Native to accept untagged packets from an upstream data center switch; otherwise, all untagged packets arriving at the uplink port are dropped. When a network is configured as Native, the network accepts tagged or untagged packets.