Access interconnects using SSH to HPE Synergy Composer
You can use the SSH option to connect to the HPE Synergy Composer and manually manage interconnects that are not managed by HPE OneView. SSH provides a command line interface to connect to the device consoles within the associated HPE Synergy enclosures.
Prerequisites
- An SSH client. Hewlett Packard Enterprise recommends you use PuTTY or SSH command to access the appliance console through an SSH connection.
- HPE Synergy Composer must have SSH access-enabled.
- Privileges: Infrastructure administrator or Network administrator with scopes as appropriate to connect to an interconnect.
Procedure
- Invoke one of the recommended tools on your local computer.
- Access the appliance by specifying its fully qualified domain name or its IP address.
- Log in using your HPE OneView credentials.
-
Issue the following commands:
- console-view
- display interconnect list
- connect interconnect <enclosure name> <bay number> 1
- Press the Enter key twice to establish a connection.
Use the help or ? command to get a list of all the commands.
NOTE:
To disconnect from the console use <Ctrl>_. (that is, Control + Shift + underscore followed by a period).
Example: Connecting to an interconnect using SSH
console-view> display interconnect list
Enclosure Bay Console Indices Model Serial Number
---------- --- -------- ---------------------------------- -------------
FVTVP30010 1 [empty]
FVTVP30010 2 [none] Synergy 20Gb Interconnect Link Module 7C953400G5
FVTVP30010 3 [none] Synergy 10Gb Interconnect Link Module TW2443001X
FVTVP30010 4 [empty]
FVTVP30010 5 [empty]
FVTVP30010 6 1 Virtual Connect SE 40Gb F8 Module for Synergy 2TV6032262
FVTVP30012 1 1 Virtual Connect SE 16Gb FC Module for Synergy CN85430004
FVTVP30012 2 1 Synergy 40Gb F8 Switch Module 2TV70800JQ
FVTVP30012 3 1 Virtual Connect SE 40Gb F8 Module for Synergy 2TV6032314
FVTVP30012 4 1 Virtual Connect SE 16Gb FC Module for Synergy CN8521003Z
FVTVP30012 5 [empty]
FVTVP30012 6 [none] Synergy 10Gb Interconnect Link Module TW2540001P
console-view> connect interconnect FVTVP30012 2 1
Connecting to interconnect...
To return to the CLI, enter <Ctrl>_. (Control + Shift + Underscore followed
by a period (.) which must be at the beginning of a line)