Forcibly deleting a logical switch if a delete action fails

If HPE OneView cannot establish communication with any of the physical switches in the logical switch, any attempt to delete the logical switch might fail. You can forcibly delete the logical switch from HPE OneView, bypassing the connectivity issues. This situation might occur if you delete the logical switch when any of the physical switches within the logical switches are offline, or switch credentials have been changed.

Prerequisites
Privileges: Infrastructure administrator or Network administrator
Procedure
  1. From the main menu, select NETWORKING > Logical Switches.
  2. In the master pane, select the logical switch you want to delete.
  3. Select Actions > Delete.
  4. If you receive an error message indicating a communication issue with the switch, click Delete or select Force delete logical switch.
  5. Review the confirmation message, and then click Yes, delete to delete the logical switch.
  6. Verify that the logical switch is no longer displayed in the master pane.