Reapply the enclosure configuration

For HPE BladeSystem c7000 Enclosure, the Reapply Configuration action re-runs the HPE BladeSystem Onboard Administrator configuration script associated with the logical enclosure. The action also verifies that SSO, SNMP and NTP are configured correctly on the enclosure and that the Onboard Administrator firmware is up to date. If connectivity has been lost to the enclosure, you are prompted to re-enter the Onboard Administrator IP address or host name and credentials.

NOTE:

You cannot reapply an enclosure configuration to monitored enclosures.

Prerequisites

Privileges: Infrastructure administrator or Server administrator

Procedure
  1. From the main menu, select SERVERS > Enclosures.
  2. In the master pane, select the enclosure to which you want to reapply the configuration.
  3. Select Actions > Reapply Configuration.
  4. Click OK.
  5. To verify that the activity is successful, check the activity for a green status in the Notifications area.

    If the activity is not successful, follow the instructions in the proposed resolution.