Ports required for HPE OneView
HPE OneView requires specific ports to be available to the appliance to manage servers, enclosures, and interconnects.
Port number |
Protocol |
Use |
Description |
---|---|---|---|
22 |
TCP |
Inbound and Outbound |
Used for SSH and SFTP. SSH is required to communicate with VC Ethernet and FlexFabric HPE Virtual Connect interconnect modules. SFTP is required for actions such as firmware upgrades and support dumps. |
53 |
UDP and TCP |
Outbound |
Used for DNS client queries. |
80 |
TCP |
Inbound |
Used for the HTTP interface. Typically, this port redirects to port 443; this port provides the access required by the iLO. This port is used by Smart Update Tools and Integrated Smart Update Tools for VMware ESXi to connect to the HPE OneView web server. |
123 |
UDP |
Inbound |
HPE OneView acts as an NTP server, iLO and HPE BladeSystem Onboard Administrator requires access. |
123 |
UDP |
Outbound |
Used as an NTP client to synchronize the appliance time. |
161 |
UDP |
Inbound and Outbound |
Supports SNMP GET calls to monitored and managed devices, such as, server iLO, HPE Intelligent Power Distribution Unit, and SAN Managers. Supports SET calls using SNMPv3 for managed devices and SNMPv1 for HPE iPDU, such as toggling HPE iPDU locator lights and outlet power control. |
162 |
UDP |
Inbound and Outbound for trap forwarding from HPE OneView |
Used for SNMP trap support from the iLO, Onboard Administrator, and HPE iPDU devices. This port is also used to monitor the VC interconnects and trap forwarding. |
443 |
TCP |
Inbound |
Used for the HTTPS interface to user interface and APIs. This port is used by SUT for VMware ESXi to connect to the HPE OneView web server. |
443 |
TCP |
Outbound |
Used for secure SSL access to the iLO, Onboard Administrator, remote support access to Hewlett Packard Enterprise, and other devices. Used for Redfish, RIBCL, SOAP, and iPDU communication. |
636 |
TCP |
Outbound |
Secure LDAP. Used for enterprise directory integration (Microsoft Active Directory, OpenLDAP) |
2162 |
UDP |
Inbound |
Used as an alternative SNMP trap port. |
3269 |
TCP |
Outbound |
Used for Microsoft Active directory LDAP global catalog port. |
5671 |
TCP |
Inbound |
Allows external scripts or applications to connect to and monitor messages from the SCMB (State-Change Message Bus). |
17988 |
TCP |
iLO Integrated Remote Console to iLO | iLO IRC initiating a connection to the iLO. |
17990 |
TCP |
Browser to iLO |
Provides browser access to the iLO IRC. |
50443 |
TCP |
Outbound |
Used for RIBCL protocol communication over SSL. This port manages HPE iPDU and related actions. The port collects utilization data to monitor the status and health of HPE iPDU. |
63001 and 63002 |
TCP |
Local, on host OS |
Used on the host OS where
SUT (Smart Update Tools) is installed. The communication is on the
|
80 |
TCP |
Outbound |
Used for HTTP communication to Brocade FOS for SAN management. |
443 |
TCP |
Outbound |
Used for HTTPS communication to Brocade FOS for SAN management. Used for HTTPS communication to HPE Primera. |
5392 |
TCP |
Outbound |
Used for HTTPS communication to HPE Nimble Storage. |
5989 |
TCP |
Outbound |
Used for CIM/SMI communication to Brocade BNA for SAN management. |
8080 |
TCP |
Outbound |
Used for HTTP/HTTPS communication to HPE 3PAR StoreServ Storage WSAPI storage systems. |