Server Hardware states

The state of your server hardware represents the way the hardware is viewed by your appliance and affects what features and functions are available to you.

Adding

The server is being added.

Applying Profile

A profile is in the process of being applied.

Monitored

Server was added successfully as a monitored server.

No Profile Applied

The server has been successfully added to the appliance for management, but no server profiles have been applied.

Profile Applied

A server profile has been successfully applied.

Profile Error

An error occurred while applying or removing a server profile.

Removed

The server was successfully removed.

Remove Failed

A server removal was unsuccessful.

Removing Profile

A profile is being removed from the server.

Unknown

No information about the server has been collected.

Unmanaged

The server hardware cannot currently be managed by the appliance.

When the server hardware state is Unmanaged, one of the following reasons is displayed next to the state in the appliance.

Communication Error

The appliance cannot communicate with the server iLO or could not communicate with the OS.

Interrupted

An operation was interrupted, leaving the server in an unmanaged state.

Inventory

The server was added automatically by an intelligent PDU and is shown for thermal and spatial calculations.

No Owner

The appliance does not have ownership of the server.

Unconfigured

Data discovered about the server was insufficient for management, or theiLO was unable to be configured.

Unsupported

The server is not currently supported by the appliance.

Unsupported Firmware

The server firmware is below the minimum supported version.

Updating Firmware

The firmware on the server is being updated from a version that is unsupported for management in HPE OneView.