Installed firmware and driver versions
This section provides information about the version of firmware and driver components installed on the server hardware.
- The installed driver versions of the components are displayed for Gen9 and Gen10 servers. If the iLO 4 firmware version is less than 2.55 for Gen9 servers, the driver inventory is not displayed.
If the iLO firmware version is less than 2.30, only iLO, ROM, and Intelligent Provisioning versions are displayed for Gen9 servers.
The versions that cannot be read from server hardware display as
unknown
.When the option card does not support UEFI protocol, the version displays as
unknown
.Agentless Management Service (AMS) must be installed to get the complete driver inventory of the server.
The firmware versions on hardware components that do not have UEFI-compatible firmware and Management Component Transport Protocol (MCTP) support display as
unknown
.In HPE Synergy 480 Gen9 Compute Module, the Synergy 100W MXM Mezzanine adapter firmware version displays as
unknown
.When the iLO firmware is updated outside of HPE OneView, a server hardware refresh is required to update the current firmware inventory.