Front panel LEDs and buttons

• Front panel LEDs and buttons in an LFF chassis with thumbscrew rack ears

  

• Front panel LEDs and buttons in an LFF chassis with quick-release latch rack ears

  

• Front panel LEDs and buttons in an SFF chassis with thumbscrew rack ears

  

• Front panel LEDs and buttons in an SFF chassis with quick-release latch rack ears

  

  Item	Description	Status
  1	UID button/LED	Solid blue = Activated Flashing blue: 1 flash per second = Remote management or firmware upgrade in progress 4 flashes per second = iLO manual reboot sequence initiated 8 flashes per second = iLO manual reboot sequence in progress Off = Deactivated
  2	Health LED	Solid green = Normal Flashing green (1 flash per second) = iLO is rebooting Flashing amber = System degraded Flashing red (1 flash per second) = System critical   If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
  3	NIC status LED	Solid green = Link to network Flashing green (1 flash per second) = Network active Off = No network activity
  4	Power On/Standby button and system power LED	Solid green = System on Flashing green (1 flash per second) = Performing power on sequence Solid amber = System in standby Off = No power present   If the system power LED is off, verify the following conditions: The facility power is present. The power supply is installed and is working correctly. The power cord is attached and is connected to a power source. The front I/O cable is connected.

When all four LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see "Front panel LED power fault codes."