Installing a uFF drive and SCM drive carrier

IMPORTANT: Not all drive bays support the drive carrier. To find supported bays, see the server QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs).
Procedure
  1. If needed, install the uFF drive into the drive carrier.
  2. Remove the drive blank.

    Removing a drive blank
  3. Install the drives.
    Push firmly near the ejection handle until the latching spring engages with the drive bay.


  4. Power on the server.
    To configure the drive, use HPE Smart Storage Administrator.