Installing a Smart Storage Battery

Prerequisites

Before you perform this procedure, make sure that you have the following items available:

The components included with the hardware option kit

NOTE: System ROM and firmware messages might display "energy pack" in place of "Smart Storage Battery." Energy pack refers to both HPE Smart Storage batteries and HPE Smart Storage Hybrid capacitors.
Procedure
  1. Power down the server.
  2. Do one of the following:
    • Disconnect each power cord from the power source.
    • Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Do one of the following:
  6. Install the Smart Storage battery.
    Installing the HPE SmartStorage Battery
  7. Install the cable.
    HPE Smart Storage battery pack cabling
  8. Install the fan cage.
  9. Install the air baffle.
  10. Install the access panel.
  11. Slide the server into the rack.
  12. Connect each power cord to the server.
  13. Connect each power cord to the power source.
  14. Power up the server.

The installation is complete.