Installing a FlexibleLOM adapter

Prerequisites

  • The components included with the hardware option kit

  • A T-10 Torx screwdriver might be needed to unlock the access panel.

Procedure
  1. Power down the server.
  2. Do one of the following:
    • Disconnect each power cord from the power source.
    • Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the primary riser cage.
  6. Remove the FlexibleLOM blank.
    Removing the FlexibleLOM blank
  7. Install the FlexibleLOM adapter.

    Installing the FlexibleLOM adapter
  8. Install the riser cage.
  9. Install the access panel.
  10. Install the server into the rack.
  11. Connect the LAN segment cables.
  12. Connect each power cord to the server.
  13. Connect each power cord to the power source.
  14. Power up the server.

The installation is complete.