Installing a front 8SFF SAS/SATA drive cage in box 1

Prerequisites

Before you perform this procedure, make sure that you have the following items available:

  • T-10 Torx screwdriver

  • The components included with the hardware option kit

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the air baffle.
  6. Remove the fan cage.
  7. Remove the bay blank.
    Removing the front bay blank
  8. Install the 8SFF front drive cage option.
    Installing the 8 SFF cage in bay 1
  9. Connect the power and data cables.
  10. Install the fan cage.
  11. Install the air baffle.
  12. Install the access panel.
  13. Slide the server into the rack.
  14. Connect each power cord to the server.
  15. Connect each power cord to the power source.
  16. Power up the server.

The installation is complete.