Prerequisites
Before you perform this procedure, make sure that you have the following items available:
Procedure
-
Power down the server.
-
Do one of the following:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the
server.
-
Do one of the following:
-
Remove the access panel.
-
Remove the riser cage.
-
Remove the riser board.
-
Install the riser.
-
If needed, install an expansion board.
-
If needed, connect data cables to the riser or expansion board.
-
Install the riser cage.
-
If needed, connect data cables to the drive backplane.
The installation is complete.