FlexibleLOM option

To install the component:

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the FlexibleLOM PCIe blank.
    Removing the FlexibleLOM blank
  6. Install the component:
    1. Firmly seat the FlexibleLOM in the slot.
    2. Tighten the thumbscrew.
      Installing the FlexibleLOM adapter
  7. Install the access panel.
  8. Slide the server into the rack.
  9. Connect the LAN segment cables.
  10. Connect each power cord to the server.
  11. Connect each power cord to the power source.
  12. Power up the server .