Rear serial port option

To install the component:

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the serial cable blank.
    Removing the serial cable blank (DL380 Gen9)
  6. Connect the serial cable option. Then, remove the backing from the double-sided tape and press down where indicated.
    Connecting the serial cable (DL380 Gen9)
  7. Install the access panel.
  8. Slide the server into the rack.
  9. Connect each power cord to the server.
  10. Connect each power cord to the power source.
  11. Power up the server.