Eight-bay SFF front drive cage option for bay 2

To install the component:

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the fan cage.
  6. Remove the bay blank.
    Removing the second bay blank
  7. Install the 8SFF front drive cage option.
    Installing 8 SFF cage in second bay
  8. If installing drives, connect the power cable.
    Connecting second bay 8 SFF single power cable
  9. Connect the data cable in one of the following configurations:
    • Connected to a PCI expansion board
      Connecting second bay 8 SFF data cable to PCI card
    • Connected to an HPE 12G SAS Expander Card
      Connecting second bay 8 SFF data cable to the SAS expander card
  10. Install the fan cage.
  11. Install the access panel.
  12. Slide the server into the rack.
  13. Connect each power cord to the server.
  14. Connect each power cord to the power source.
  15. Power up the server.