Location Discovery Services ear option

To install the component:

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the fan cage.
  6. Remove the cable protection panel from the left side of the server.
    Removing the cable protection panel
  7. Remove the standard ear.
    Removing the standard ear
  8. Install the Location Discovery Services ear option and route the discovery service cable through side channel.
    Installing the discovery service option
  9. Install the cable protection panel.
    Installing the cable protection panel
  10. Connect the discovery service cable.
    Connecting the discovery cable
  11. Install the fan cage.
  12. Install the access panel.
  13. Slide the server into the rack.
  14. Connect each power cord to the server.
  15. Connect each power cord to the power source.
  16. Power up the server.