Enabling Embedded SATA support

Prerequisite

For partitions larger than 2.2 TB, boot mode is set to UEFI Mode.

Procedure
  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > SATA Controller Options > Embedded SATA Configuration.
  2. Ensure that you are using the correct AHCI or RAID system drivers for your SATA option.
  3. Select a setting:
    1. Enable SATA AHCI Support—Enables the embedded chipset SATA controller for AHCI.
    2. Enable HP Dynamic Smart Array RAID Support—Enables the embedded chipset SATA controller for Dynamic Smart Array RAID.
  4. Save your setting.
  5. In UEFI mode, move this UEFI boot option to the top of the UEFI boot order list as described in Changing the UEFI Boot Order list.
  6. Reboot the server.