Previous Topic

Next Topic

Remove the PCI riser cage

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser cage.

  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Extend the server from the rack.
  4. Remove the access panel.
  5. Release the full-length expansion board retainer, and then remove the PCI riser cage.

    Releasing the full-length PCI retainer clip and PCI riser board

  6. Remove the full-length expansion board.