|
|
Front panel LEDs and buttons
|
Item |
Description |
Status |
|---|---|---|
|
1 |
Solid green = System on Flashing green (1 Hz/cycle per sec) = Performing power on sequence Solid amber = System in standby Off = No power present* |
|
|
2 |
Health LED |
Solid green = Normal Flashing amber = System degraded Flashing red (1 Hz/cycle per sec) = System critical Fast-flashing red (4 Hz/cycles per sec) = Power fault** |
|
3 |
NIC status LED |
Solid green = Link to network Flashing green (1 Hz/cycle per sec) = Network active Off = No network activity |
|
4 |
UID button/LED |
Solid blue = Activated Flashing blue (1 Hz/cycle per sec) = Remote management or firmware upgrade in progress Off = Deactivated |
*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the power button cable is disconnected.
**To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and reference the server troubleshooting guide.