Previous Topic

Next Topic

Powering on and selecting boot options

  1. Connect the Ethernet cable.
  2. Press the Power On/Standby button.
  3. During the initial boot:
    • To modify the server configuration ROM default settings, press F9 when prompted from the start up sequence to enter the RBSU. By default, RBSU runs in the English language.
    • If you do not need to modify the server configuration and are ready to install the system software, press F10 to access Intelligent Provisioning.

      NOTE: If an HP Smart Array controller has been added or is embedded in the system, the controller defaults to a RAID configuration based on the size and number of drives installed. For more information on modifying the controller default settings, see the documentation on the Documentation CD.

For more information on automatic configuration, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the iLO Management Engine Information Library.