Previous Topic

Next Topic

Location Discovery Services Ear option

  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Extend the server from the rack.
  4. Remove the access panel.
  5. Remove the fan cage.
  6. Remove the cable protection panel from the left side of the server.

    Removing the cable protection panel

  7. Disconnect the Location Discovery Services ear cable.

    Disconnecting the discovery cable

  8. Remove the Location Discovery Services ear.

    Removing the discovery service option

To replace the component:

  1. Install the Location Discovery Services Ear option and route the Location Discovery Services cable through the side channel.

    Installing the discovery service option

    Cable routing

  2. Install the cable protection panel.

    Installing the cable protection panel

  3. Connect the Location Discovery Services cable.

    Connecting the discovery cable

  4. Install the fan cage.
  5. Install the access panel.
  6. Slide the server into the rack.
  7. Connect each power cord to the server.
  8. Connect each power cord to the power source.
  9. Power up the server.