FlexibleLOM option
To install the component:
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Extend the server from the rack.
- Remove the access panel.
- Remove the primary PCIe riser cage.
- Remove the FlexibleLOM PCIe blank, if present.
- Install the component:
- Firmly seat the FlexibleLOM in the slot.
- Tighten the thumbscrew.
- Install the access panel.
- Install the server into the rack.
- Connect the LAN segment cables.
- Connect each power cord to the server.
- Connect each power cord to the power source.
- Power up the server.