Optical disk drive option
To install the component:
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Extend the server from the rack.
- Remove the access panel.
- Remove the fan cage.
- Depending on the server options installed, do one of the following:
- Remove the air baffle.
- Remove the mezzanine tray.
- Remove the bay blank.
- Install the universal media bay.
- Install the optional optical disk drive.
- Using the cable trough, connect the cable to the front VGA/USB 2.0 connector on the system board.
- Connect the SATA optical drive cable to the front optical disk drive connector.
- Secure the SATA optical drive cable with the retention clips.
- Depending on the server options installed, do one of the following:
- Install the fan cage.
- Install the access panel.
- Slide the server into the rack.
- Connect each power cord to the server.
- Connect each power cord to the power source.
- Power up the server.