Installing the Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the Hewlett Packard Enterprise website.

CAUTION: In systems that use external data storage, be sure that the server is the first unit to be powered down and the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the external drives as failed when the server is powered up.

To install the component:

1. Power down the server.
2. Remove all power:
   1. Disconnect each power cord from the power source.
   2. Disconnect each power cord from the server.
3. Do one of the following:
   • Extend the server from the rack.
   • Remove the server from the rack.
4. Remove the access panel.
5. Remove the air baffle.
6. Install the Smart Storage Battery on the server.

   

7. Install the air baffle.
8. Install the access panel.
9. Do one of the following:
   • Slide the server into the rack.
   • Install the server into the rack.
10. Power up the server.