Configuring an HPE Smart Array Gen10 controller
Procedure
- Power up the server.
- If you are running the server in UEFI Boot Mode, select the boot options.
- Update the drive firmware if it is not the latest revision.
- (Optional) If running the server in Legacy Boot Mode, set the controller as the boot controller.
- (Optional) If running the server in Legacy Boot Mode, change the controller boot order.
- If the new controller is not the new boot device, install the device drivers.
- If the controller firmware is not the latest version, use SPP to update it.
- Use UEFI System Utilities or HPE Smart Storage Administrator (HPE SSA) to create arrays and logical drives.
See the following resources for more information:
SPP – See the product documentation in the information library:
UEFI System Utilities or HPE Smart Storage Administrator – See the following guide in the information library (https://www.hpe.com/info/smartstorage-docs):
HPE Smart Array SR Gen10 Configuration Guide