Install an AC power supply

WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank to cool before touching it.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank.
Procedure
  1. If you are installing a power supply in the power supply bay 2, remove the power supply blank.

    Removing the power supply blank
  2. Slide the power supply into the bay until it clicks into place.

    Installing the AC power supply
  3. Connect the power cord to the power supply.
  4. Secure the power cord in the strain relief strap attached to the power supply handle:
    1. Unwrap the strain relief strap from the power supply handle.
      CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable. Never bend power cords and server cables tight enough to cause a crease in the sheathing.
    2. Secure the power cord with the strain relief strap. Roll the extra length of the strap around the power supply handle.

      Securing the power cord in the strain relief strap of an AC power supply
  5. Connect the power cord to the power source.
  6. Make sure that the power supply LED is green.