Install the air baffle

CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure
  1. Observe the alignment dash lines shown in the following image to install the air baffle on the chassis.

    Installing the air baffle
  2. Press down the air baffle and make sure that the tabs on the blue latches are engaged in their chassis slots.

    Securing the air baffle latches
  3. Install the access panel.
  4. Perform the post-installation/maintenance steps required by the procedure that required the removal of the air baffle.