M.2 SATA SSD enablement option

The server supports the installation of an M.2 SATA SSD enablement board in the PCIe3 expansion slots 1–4. This enablement board supports two M.2 2280 SATA SSDs.

Use the embedded HPE Smart Array S100i SR Gen10 Controller to manage the M.2 SATA SSDs. The S100i SR Gen10 SW RAID support requires that the server boot mode be set to UEFI.

Kit contents

• M.2 SATA SSD enablement board

• M.2 SATA SSD – The SSD can either be preinstalled in the enablement board or sold separately.

• M.2 SATA cable