Configuring an HPE Smart Array Gen10 controller

Procedure
  1. Power up the server.
  2. If you are running the server in UEFI Boot Mode, select the boot options.
  3. Update the drive firmware if it is not the latest revision.
  4. (Optional) If running the server in Legacy Boot Mode, set the controller as the boot controller.
  5. (Optional) If running the server in Legacy Boot Mode, change the controller boot order.
  6. If the new controller is not the new boot device, install the device drivers.
  7. Update the controller firmware if it is not the latest revision.

    • For MR controllers, use Service Pack for ProLiant (SPP), MR Storage Administrator, or StorCLI.

    • For SR controllers, use SPP.

  8. Create arrays and logical drives.

    • For MR controllers, use UEFI System Utilities, MR Storage Administrator, or StorCLI.

    • For SR controllers, use UEFI System Utilities or HPE Smart Storage Administrator (HPE SSA).

See the following resources for more information: